FOR OVER 20 YEARS

PR3510-00-00-S90 CAN Bus Dual High Power I/O Controller PLC

SKU : PR3510-00-00-S90

PR3510-00-00-S90 CAN Bus Dual High Power I/O Controller - (Alu Extrud, IP66, 24IN-20OUT. IN1-4=28V, IN5-20=10V, IN21-24=5V WKUP=3H,4L. VREF1=5V, VREF2=10V. Firmware CAN Open)

  • PR3510-00-00-S90 CAN Bus Dual High Power I/O Controller - (Alu Extrud, IP66, 24IN-20OUT. IN1-4=28V, IN5-20=10V, IN21-24=5V WKUP=3H,4L. VREF1=5V, VREF2=10V. Firmware CAN Open)
  • PR3510-00-00-S90 CAN Bus Dual High Power I/O Controller - (Alu Extrud, IP66, 24IN-20OUT. IN1-4=28V, IN5-20=10V, IN21-24=5V WKUP=3H,4L. VREF1=5V, VREF2=10V. Firmware CAN Open)
  • PR3510-00-00-S90 CAN Bus Dual High Power I/O Controller - (Alu Extrud, IP66, 24IN-20OUT. IN1-4=28V, IN5-20=10V, IN21-24=5V WKUP=3H,4L. VREF1=5V, VREF2=10V. Firmware CAN Open)

The PR3510 is the most versatile High Power I/O controller (PLC) on CAN bus. It can manage up to 210A of load, accepts 2 independent power sources from 9-32Vdc. It has 24IN-20 OUT with status LEDs, fully IP66 rated design and -40°C to +80°C fully operating.

  

Product details

The POWERPLEX CAN Bus Dual High Power I/O Controller (PLC) PR3510 is programmable and ultra versatile high power I/O control unit intended to manage up to 210A on most types of loads with a maximum total continuous current of 120A at high temperature. This device can accept 2 independent power source from 9-32Vdc and it is designed with smart solid states relays suitable for any inductive or resistive loads. This unit is dedicated for application where high power output is required such as lights, fans, motor and more. It can be used as a standalone unit or within a CAN bus multiplexed communication network.

The PR3510 has the capability to process 24 inputs for logical signal and even most known analog signal type. It has also 20 outputs and 4 of them can be used as source or sink which even allow “H” Bridge control.

All solid state relay outputs are fully protected against short circuits. It offers many great functional capabilities such as pulse wide modulation (PWM) for variable intensity control. It can even detect open loads circuit. This device is featured with status LED for each single I/O and also has sleep mode function allowing power saving.

The PR3510 can communicates with the other CAN bus device, such as diesel engines and transmission systems and more.

Pran systems can design program for your application. We have a great expertise in a very wide applications range. Pran provides tools to simplify the program creation. For more information on how to program, see tools section.

Documents

Options

Hardware Features

-       Fully IP66 rated enclosure

-       -40°C to +80°C Operating

-       9 to 32Vdc Operating

-       1x CAN 2.0b  J1939

-       1x CAN 2.0b

-       24x Analog or Digital signal input Software configurable

  • IN1 to IN4: 0-28V
  • IN5 to IN20: 0-10V
  • IN21 to IN22: 0-5V
  • IN23 to IN42: 0-5V, 4-20mA, 0-500 ohms

-       20x Outputs Sourcing / Sinking

  • OUT1 to OUT4: 15A Sourcing / 10A Sinking
  • OUT5 to OUT12: 15A Sourcing
  • OUT13 to OUT20: 6A Sourcing

-       5.0 Vdc Regulated Voltage Out Vref1

-       10.0 Vdc Regulated Voltage Out Vref2

 

See technical sheet in the documents section for more details 

 

Software: Firmaware CAN Open included.

Custom option REQ