FOR OVER 20 YEARS

PR3410-00-00-S99 - CAN Bus Single DC Motor Controller PLC

SKU : PR3410-00-00-S99

PR3410 - CAN Bus Single DC Motor Controller J1

  • PR3410 - CAN Bus Single DC Motor Controller J1
  • PR3410 - CAN Bus Single DC Motor Controller LEDs

The PR3410 (PLC) is a compact and powerful solution to control two independent 25A DC Motors with variable speed control and accurate current detection. Designed for harsh environment, 9-32Vdc system and -40°C to +80°C fully operating. J1939 Slave firmware.

  

Product details

The PR3410 - POWERPLEX CAN Bus Single DC Motor Controller (PLC) has a Bi-directional motor output drive suitable for most brushed DC motors. This drive handles up to 20Amp peak, 10 Amp nominal, with variable speed control and accurate current detection. Speed control is done by PWM where the frequency and duty cycle are fully adjustable. Motor terminals shunting and over-current reading which in effect, will significantly improve both the performance and reliability of any motor control system.

 

Moreover, the PR3410 is designed with several multipurpose I/Os with its 6 Signal Inputs which can be software configurable, analog or digital and also its 6 smart outputs, which are low side, high side or both. All outputs are fully protected against over current and short circuits and are featured with accurate current detection. This device also include LED's for each single I/O for quick diagnosis.

 

Key Benefits

 

  • All in one compact, powerful, cost effective Single Motor Controller and motor drive
  • High feedback current reading accuracy even in PWM
  • Reduces significantly wiring and installation time
  • Outputs are self protected against short circuit with live diagnostic; no need for fuses
  • Provides live diagnostic on status LED's
  • Featured with general purpose I/O for additional functionalities
  • Allows maximum versatility with custom memory parameters;
  • Programmable and configurable using VisionplexIII software.

 

Applications

 

  • Window & Door controllers 
  • Wheelchair ramps 
  • Electric seats with setting memories 

 

This device has a sleep mode function allowing power savings with ultra low power consumption of 14mA and can be wake up from dedicated inputs or by CAN communication.

The PR3410 can communicate with other CAN bus devices, such as diesel engines, transmission systems and more. It can get any available parameter, DTC and even send special commands to ECM or other CAN devices.

 

The PR3410 has an IP66 rated enclosure that makes it dust tight and waterproof.

In addition of being waterproof, it is also shock and vibration resistant. It is designed in accordance with SAE

J1455, J1113-11-12-13 specifications.

 

The PR3410 can be provided with J1939 or CAN Open (301-401) generic firmware for slave applications. 

This device is designed with an open architecture, which allows software designers to create their own software for master applications. Pran also provides tools to simplify the program creation. For more information on how to program, kindly see tools section. Pran Systems can also design a specific program for your application. We have a great expertise in a very wide application range.

Documents

Options

Hardware Features

  • Fully IP66 rated enclosure
  • -40°C to +80°C Operating
  • 9 to 32Vdc Operating with reverse polarity protection
  • 1x CAN 2.0b  J1939
  • 6x Signal Inputs. All inputs accept digital signals from 0 to 32Vdc.
    Electrical details for analog types.
    • IN1-6: (DA32) 0-32.0V ADC= 0-1023 bits  Note: Pull Up=4.5v, Z=66Kohms
    • OUT2&4: 4.0Amp Sourcing with current reading / 1.0Amp Sinking
    • OUT1, 3-6: 4.0Amp Sourcing with current reading
  • Wake up; IN5, 8, 10 =low; IN12=Hi 
  • 6x Outputs Sourcing / Sinking
  • 1x Motor Output Bi-directional 10A Nominal with current reading

 

See Spec sheets in the documents section for more details 

*Connection cables sold separately, see related products section.

 

Software

With J1939 Firmware for slave application

Also available with CAN Open 301-401 Slave Firmware, Contact us for more info.

Custom option REQ