FOR OVER 20 YEARS

Battery Management and Anti-idling System

SKU : BMAS

PR2450 CAN Bus Battery Manager and Power Distribution connector

  • PR2450 CAN Bus Battery Manager and Power Distribution 1
  • PR2450 CAN Bus Battery Manager and Power Distribution connector
  • PR2450 CAN Bus Battery Manager and Power Distribution w fuses top

THE NEW ALL IN ONE SOLUTION OF ANTI-IDLING SYSTEM INTEGRATED TO THE BATTERY MANAGEMENT SYSTEM.

No fuse, no relays and no diodes required.  Self protected and safe.

 

  

Product details

The new software integrates anti-idling function, battery management function and cab temperature monitoring function to insure that the engine runs only when it is required.  This stand alone system can be installed in any type of vehicle where enegy management is critical.

 

Main functions

  • • Starts and stops engine;
  • • Manages inside vehicle temperature;
  • • Manages and isolates up to 3 battery banks;
  • • Isolates the chassis battery;
  • • Fast idle function with configurable RPM settings;
  • • Fixes recharging problems related to the new generation vehicles;
  • • Warns the system when a battery bank is defective;
  • • Boost function installed;
  • • Inputs and power outputs available for other electric systems.

 

Key Benefits

  • • All-in-one cost effective solution, offering a fast return on investment;
  • • Reduces fuel consumption significantly with its anti-idling feature;
  • • Eliminates significant voltage drops;
  • • Automatic boost mode for engine start up;
  • • Eliminates auxiliary battery banks having charging problems caused by the new smart alternator;
  • • Self protected (no additional circuit protection device is required).

  

Applications 

  • • Emergency vehicles – power management 
  • • Work truck equipments 
  • • Electrical vehicles 
  • • Retrofitting of most DC power systems
  • • Power generators

Documents

Options

Hardware Features of the PR2450

  • Operating supply voltage range: 9 to 16 V
  • Operating temperature range: -40°C to +80°C
  • IP20 enclosure with Fan ( IP60 version without fan available )
  • 1 CAN 2.0b port SAE-J1939
  • 1 CAN 2.0b port
  • 1 CAN single wire SAE-J2411
  • I/O and Diagnostic LEDs
  • Maximum total continuous current: 300A
  • No Top Fuse
    • IN1-8: (DA10) 0-10.0V ADC= 0-1023 bits  Note: Pull Up=4.5v, Z=94Kohms 
  • 8x Signals Inputs. All inputs accept digital signal from 0 to 32Vdc. Electrical details for analog types.
  • Wake up; IN1-6=Hi, IN7-8=Low
  • 12x Outputs Sourcing / Sinking
  • OUT1-4: 20Amp Sourcing with current sensing
  • OUT5-6: 10Amp Sourcing with current sensing
  • OUT7-12: 1.0Amp Sourcing
  • BAT1: 100Amp with current sensing
  • BAT2: 200Amp with current sensing
  • BAT3: 40Amp with current sensing
  • 1x Alternator Power Input 300A
  • 3x Battery Terminals

 

See Spec sheets in the documents section for more details 

*Connection cables sold separately, see related products section.

 

Software

Software included with the module.

Custom option REQ